NEON GREEN HTV HEAT TRANSFER VINYL 12" x 15"
To change the quantitiy update your items in the shopping cart.
The best material for T-shirts.
Ideal for application onto lightweight cotton, This vinyl's thin composition and soft hand make it great for personalizing fashion apparel.
- 12" x 15"
- Matte finish
- Best choice for cutting fine-detailed designs
- Laser cutter compatible
- Please note that colors may differ slightly than real product due so screen resolution settings.
- Composition: Polyurethane (PU)
- Carrier: Clear, Pressure-Sensitive
- Thickness: 88 microns/.088mm (95 microns for Electric colors)
- Stretch & Rebound: 3.5
- Washability: 50
- Safety: CPSIA Certified- You can view certificate by simply asking to.
1-Color Application Instructions
2-Color Application Instructions
Time:Tack background 2 seconds, peel hot, place foreground on top, 15 seconds
Heated Lower Platen on 100% Polyester
Pressure:60 psi (#6/Medium on Hotronix® machines)
Note:Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
- Lycra®/Spandex Blends
Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen = 290°
Upper Platen = 270°
Time = 30 secs
Pressure = 60 psi (#6/Medium on Hotronix®)
Machine wash inside-out using mild detergent.
Do not use bleach.
Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity.
Keep away from direct heat, sunlight and humidity.
Recommended shelf life is one year.
Suggested Cutter Guidelines and Settings-
IMPORTANT: We are not responsible for damages because of these suggested settings. This information is for guiding only. All machines have different tweaks and settings. We recommend test cutting first!
ALWAYS TEST CUT FIRST
Silhouette Setting Suggestions:
Blade Depth: 3
|GCC||45°/60°||80g - 90g||0.25||25 - 50 cm/s|
|Roland GX-24||45°||80g - 90g||.25||25 - 50 cm/s|
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.