WORLDS BEST DAD SUBLIMATION BLANK MDF PHOTO BOARD PHOTO PANEL PICTURE
100% Made in the USA
Gloss White Unisub Sublimation Hardboard Blank Sublimatable
Quantity: Choose from Drop Down Box
Material: Gloss White Unisub Hardboard
Size: 6" wide x 5" high
Stand: Stands are sold seperately.
Thickness: 1/8" (4mm)
Back: Raw Hardboard Color
Coating: Clear, Peel-Away Film
Manufactured: Made in USA
** Please inquire about other custom cut shapes or designs. **
They have a clear plastic coating on them that must be removed before pressing.Heat press settings:
- temperature - 385 degrees F
- dwell time - 55 Seconds
- pressure - medium
Layer the press from the bottom pad to the top heat platen as follows:
1. Scratch paper (I use butcher paper from Sams)
2. 2-3 layers of soft paper towel
3. substrate (this item)
4. transfer (your design)
5. Scratch paper
1. Remove the protective plastic coating if any from the substrate.
2. Use a lint-free towel to remove any loose debris from the substrate if necessary.
3. Position the substrate onto the transfer and adhere transfer to substrate using heat tape. 4. Place the transfer and substrate in the press onto the paper towel (transfer on top of substrate).
5. Place the Teflon sheet or scratch paper over the transfer.
6. Press the items using the sublimation settings listed above.
7. Remove items from the press immediately. Use heat resistant gloves if necessary - the items will be very hot.
8. Remove transfer from substrate.
- If the image of the final product appears light increase the pressure or the dwell time slightly (5-15 seconds).
- If the image on the final product appears blurred or substrate appears yellowed reduce the dwell time slightly (5-15 seconds).
We do not accept returns but we will gladly echange or replace any item if you contact us within 7 days and returned within 14 days.
If you recieved a damaged item, please contact with picture of the damage and we will happily send you a replacement.